Hydraulic Anchor

SLM series Hydraulic Anchor are used for grapping tubes in pipes for operations like water layer injection, acidification, fracturing and others to avoid tubing shifting. Suitable for onshore and offshore operations.

Details

The SLM series hydraulic anchor were developed to provide the market with more reliable technology and more hoisting performance. Hydraulic anchor body use 42CrMo, anchor fluke has been made surface carburized quenching with 20 watts CrMnTi, which could provide the hydraulic anchor with high level of strength and reliably. Non-metal hydraulic anchor are usually used with hydraulic packer. With pressure, the anchor claws could stretch out through the tubing to catch the casing. The anchor claw is made of hydrogen butadiene acrylonitrile rubber (Oil, acid and alkali resistance), for which will have no damage to the casing. Included but not limited by the advantages mentioned, SLM series hydraulic anchor might be your best choice.

 

General Features

•  Manufactured according to API 10D
•  Suitable for cold area and desert environment
•  Suitable for onshore or offshore operations
•  Wide range of selection for different operations
•  Suitable for cold area and desert environment

 

Main aramaters

Maximum Outside Diameter: 3-1/8” – 4-1/2” (80 mm - 114 mm)

 

Parameters:

 

Type O.D. (mm) I.D. (mm) Length (mm) Temp/Pres
(℃/Mpa)
Thread Connection
SLM-77/35-150/50 77 35 325 150/50 2-3/8 (EU)
SLM-80/35-150/50 80 35 325 150/50 2-3/8 (EU)
SLM-95/40-150/60 95 40 386 150/60 2-7/8 (EU)
SLM-102/42-150/70 102 42 386 150/70 2-7/8 (EU)
SLM-110/55-150/75 110 55 386 150/75 2-7/8 (EU)
SLM-114/55-150/75 114 55 386 150/75 2-7/8 (EU)
SLM-136/62-150/75 136 62 425 150/75 3-1/2 (EU)
SLM-148/76-150/75 148 76 425 150/75 3-1/2 (EU)
SLM-165/89-150/75 165 89 455 150/75 3-1/2 (EU)
SLM-210/89-150/75 210 89 485 150/75 3-1/2 (EU)

Related Items